![]() ![]()
This has 48V phantom power capability for use with condenser mics, although we recommend using a battery or the optional power supply if you want to use it with iOS devices since it draws a little more juice.Ī Loopback+ mode lets you route channels 3 and 4 through audio apps for processing, essentially using them as live effects, as well as allowing audio from your phone back into the interface. Again, you have the RCA input for a mixer or similar source, the headphone/mic input, and also a combined ¼ inch XLR combo jack for connecting a studio mic or a line level source like a guitar or bass. This larger model features up to four audio inputs. #Ik multimedia modo bass review androidCharging Android devices will vary, depending on your device specifications, it’s a far more fragmented ecosystem than Apple’s. If you are using an iPhone or iPad, charging it through an external power supply will also charge your Apple devices. It too can be powered by two AA batteries or through USB. ![]() #Ik multimedia modo bass review PcHere, you get Mac and PC compatibility as well, and a mini-DIN output with three cables provided for connection via Lightning, USB-A and USB-C. #Ik multimedia modo bass review proThe iRig Stream Pro is a quite different proposition and also costs considerably more. IK says sound is sent to the device in mono because many streaming services sum down to mono anyway, though we would have liked to see a stereo option here too. Though relatively simple, the Solo will suit anyone who needs to record or broadcast their vocals together with another source like turntables or a CD system, and perhaps mix in audio from a phone app as well. While the headphone socket has a level control, the mic input is fixed at 27dB – which is slightly limiting, although you can also control the level of the stream sent to your phone. A “thru” port lets you send the output of the interface to an external mixer, speakers or another recording device. You can also use the “loopback” option to mix audio sent from the phone, say from a music app, into the whole signal. The output is sent to your mobile device in mono and can be used by apps like Instagram as part of a broadcast or recording. ![]() The idea behind the iRig Stream is that you can use the RCA inputs to connect a mixer, DJ setup or keyboard and also use the combined mic/headphone mini jack socket to monitor and speak over that signal – for example, broadcasting yourself performing a DJ set. IK Multimedia iRig Stream Solo Broadcast yourself ![]() These don’t come in the box, which presumably helps keep the cost down. But since most mobile devices haven’t featured a conventional headphone port for some time, you might need to add your own 3.5mm-Lightning or USB-C cable to hook the two devices up. It connects to your iPhone, iPad or compatible Android phone via a 3.5mm TRRS jack. Lightweight but fairly sturdy with a plastic casing, it comes with the two AA batteries it needs for power and which provide around 50 hours of run time. The iRig Stream Solo costs a shade under 50 euro which, if not quite an impulse buy, certainly isn’t expensive. Let’s start with the most affordable option. The Solo is more affordable than the existing iRig Stream, while the Pro more features. IK Multimedia has been making audio interface hardware that fills this gap, and the two new members of the iRig Stream family continue that trend.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |